Scarlett SC-1149 User Manual download pdf (Page 6)

IM010

www.scarlett.ru SC-1149

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

Before connecting the appliance for the first time

check that voltage indicated on the rating label

corresponds to the mains voltage in your home.

For home use only. Do not use for industrial

purposes. Do not use the appliance for any other

purposes than described in this instruction manual.

Do not use outdoors.

Do not disassemble the appliance when it is

plugged to the power supply. Always unplug the

appliance from the power supply before cleaning

and when not in use.

To prevent risk of electric shock and fire, do not

immerse the appliance in water or any other liquids.

If it has happened, unplug it immediately and check

in service center.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliances by a

person responsible for their safety.

Children should be supervised to ensure that they do

not play with the appliance.

Do not leave the appliance switched on when not in

use.

Do not use other attachments than those supplied.

Do not operate after malfunction or cord damage.

Do not attempt to repair, adjust or replace parts in

the appliance. Check and repair the malfunctioning

appliance in the nearest service center only.

Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around the

appliance.

Do not place the appliance near gas or electric oven

or store at heated surface.

Avoid contacting with moving parts.

The blades are very sharp, so handle them with care.

Do not push products into the appliance with fingers

while it is in operation. If food becomes lodged in the

feeder tube, use the pusher to push it down. If this

НШОЬЧ’Э аШЫФ, ЭuЫЧ ЭСО ЦШЭШЫ ШПП, uЧplug the unit, and

then disassemble the appliance to remove remaining

food.

When carrying the unit be sure to hold the motor

housing with both hands. Do not carry the unit by the

hopper plate or head.

Do not fix the cutting blade and cutting plate when

using KUBBE attachment.

Do not grind hard food such as bones, nuts, ginger

or other products with hard fiber.

When the circuit breaker activates, do not switch on.

Do not run the meat grinder continuously for

longer than 10 minutes. Turn the unit off and let it

rest for at least 10 minutes to cool down the motor,

otherwise the motor may be damaged.

Be sure to turn the appliance off after each use.

Make sure the motor stops completely before

disassembling.

Do not overload the appliance with products.

If the product has been exposed to temperatures

below 0ºӚ for some time it should be kept at room

temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce

minor changes into the product design without prior

notice, unless such changes influence significantly

the product safety, performance, and functions.

BEFORE THE FIRST USE

Wash all parts (except body) in warm soapy water.

Before plugging in, ensure the appliance is switched

off.

INSTRUCTION FOR USING

ASSEMBLING

Place the head tightly onto the head inlet.

Place the snake into the head, long end first, and

turn to feed the screw slightly until it is set into the

motor housing.

Place the cutting blade onto the snake shaft with the

blade facing the front as illustrated. Place the

desired cutting plate next to the cutting blade, fitting

protrusions in the slots. If it is not fitted properly,

meat will not be ground.

Screw the fixing ring tightly. Do not overtighten.

Place the feed tray on the head and fix it into position.

Locate the unit on a firm surface.

The air passage at the bottom and the side of the

motor housing should be kept free and not blocked.

MINCING MEAT

Cut all foods into pieces so that they pass easily into

the hopper opening.

Plug the unit and turn it on by switching the ON/O/R

switch to ON position and the ON/R switch to ON

position.

Feed foods onto the feed tray. To feed it use the

food pusher only.

After use switch the unit off and unplug it from the

power supply.

MAKING KUBBE

Kubbe is a traditional Middle Eastern dish. It is

usually prepared of lamb and bulgur minced together

to smooth paste. Paste is formed to hollow tubes,

stuffed with mixture of meat and spices and then

deep-fried.

Feed the prepared minced meat through the kubbe

maker.

Cut the resulting tube into cylinders of desired

length.

Stuff the cylinders with filling and seal the ends.

Deep-fry kubbe.

MAKING SAUSAGES

Put the sausage skin in warm water for 10 minutes.

Then slide the wet skin onto the sausage horn.

Put the minced meat in the tray. To fill the skin push

the meat into the cutter housing.

If the skin gets stuck onto the sausage horn, wet it

with some water.

REVERSE FUNCTION

In case of jamming switch off the appliance and then

turn the ON/O/R switch to O position, turn ON/R

switch to R position and then press ON/O/R switch

to R position.

Snake will be rotating in the opposite direction, and

the head will get empty.

IП ТЭ НШОЬЧ’Э аШЫФ, ЬаТЭМС ШПП ЭСО uЧТЭ КЧН МХОКЧ ТЭғ

CLEANING AND MAINTENANCE

DISASSEMBLING

Switch off the appliance and make sure that the

motor has stopped completely.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Comments to this Manuals

No comments

Scarlett SC-1149 User Manual Page 6

Comments to this Manuals